Descrizione
This open source electronic hardware STM32 development Kit is designed based on the STM32F429I series with STM32F429IGT6 MCU, including the mother board and the MCU core board Core429I.
It has a rich expansion interface that supports access to a variety of peripheral modules, suitable for both beginners of MCU and experienced developers.
SPECIFICATION
STM32F429IGT6 Core Board
– Core: Cortex-M4 32-bit RISC
– Feature: single-cycle DSP instructions
– Operating Frequency: 180MHz, 225 DMIPS/1.25 DMIPS/MHz
– Operating Voltage: 1.8V-3.6V
– Package: LQFP176
– Memories: 1024kB Flash, 256+4kB SRAM
– MCU communication Interfaces:
– 6 x SPI, 4 x USART, 4 x UART, 2 x I2S, 1 x SAI, 3 x I2C
– 1 x FMC, 1 x SDIO, 2 x CAN
– 1 x LCD-TFT
– 1 x USB 2.0 HS/FS controller (with dedicated DMA)
– 1 x USB HS ULPI (external PHY required)
– 1 x 10/100 Ethernet MAC
– 1 x 8 to 14-bit camera interface
– AD and DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
– Debugging/Programming: supports JTAG/SWD interfaces, supports IAP
– IS42S16400J: SDRAM 1 Meg Bits x 16 Bits x 4 Banks (64-MBIT)
– AMS1117-3.3: 3.3V voltage regulator
– MIC2075: onboard USB power management device
– For more interface description, please refer to the images.
DISTRIBUTION LIST
1 * STM32F429IGT6 development board
1 * USB type A plug to mini-B plug cable
1 * USB type A receptacle to mini-B plug cable
1 * 4-pin 2-pin wires pack
1 * USB power cable
1 * Software CD
1 * 4.3 inch 480×272 Touch LCD
1 * DP83848 Ethernet Board
1 * USB3300 USB HS Board
1 * NandFlash Board (A)
1 * UDA1380 Board
1 * Micro SD Storage Board
1 * OV2640 Camera Board
1 * Ethernet Cable
1 * 4.3 inch LCD screws pack
Openness: The entire system is highly open, all I/O is open, and development is not limited. Users can also design their own modules for easy access to the system.
Modular: Individual modules can be separated from the system and connected to other systems for easy initial evaluation of the product.
Expandability: With clear identification and convenient interface, developers can easily use all the resources of MCU, debug and various test programs.
Transplanted: Modular design brings superior portability, and each module can be connected to other MCUs (such as PIC, AVR, 51, etc.) or ARM (such as ARM Coretex-M0, ARM7, etc.).
Functionality: We will continuously provide peripheral modules for common functions. The peripheral modules and the system functions will be continuously updated so that you can design your own peripheral modules.